Are you looking for why does the ninja blender smells like burning?
This happens when you try to blend some hard substances, for example, ice, and several hard materials,
which increase the number of problems and issues in the blender like ninja blender smell like burning, body parts.
The ice dulls the blade edges, making it less sharp than before, increasing the Motor’s stress and warming it up.
Due to the breakage or tear in the O ring gasket, the smoothie you are trying to blend with ice goes directly downward towards its base,
damaging its interior base parts such as carbon brushes and the Motor.
This causes a replacement in a blender’s body parts such as O ring gasket, extractor blades, and Motor. But you don’t have to worry anymore,
and you can replace these parts at home using a flat screwdriver, and you can replace these body parts easily at home, which you quickly get from any hardware shop. Best blender for kale smoothies with ice
The Problems Which You Might Be Facing
- Ninja blender smell bad
- Ninja Blender overheated
- The new blender smells like burning
- Ninja blender making a grinding noise
- Ninja cup smells bad
Ninja Blender Smells Like Burning
Click on Image and Check The Latest Price of Ninja Blender on Amazon
If your blender is leaving a bad smell, then the first thing you should make sure is this a nasty or disgusting smell or a burning smell; as you can see, these are two different smells.
If it smells like burning, that means something is wrong in your blender, and it needs some replacement in the gasket, coupler, blades,
Maybe the Motor to be replaced. And if it is a nasty or disgusting smell, that means you should clean the jug of the blender with hot water,
and this is due to the food or vegetables which we blend sticks in the blades, gaskets, and around the pitcher make sure you unplug the blender before cleaning the jug.
1. Ninja Blender Overheated
This happens when we use the blender for a long time, for a long term, so the blender gets heat up, but you don’t have to worry about it.
Unplug your blender and leave it for at least 20 to 25 minutes, and it will be back at its average temperature.
2. Ninja Blender Smells like Burning
If there is a burning smell coming through your blender so it seems to be there might be some issue due to excessive use of blender causing pressure on its Motor, Which becomes necessary to manipulate it.
You should keep in mind that a blender is an electronic machine it can have issues in it and that can be fixed by troubleshooting because through troubleshooting you can come to know what is the problem in it.
3. Ninja Blender Making a Grinding Noise
If your blender is making some noise or it’s been noisy, so there might be a reason for that noise that can be due to the bearing displacement,
which allows the blade to act freely maybe there is a need for replacement in bearing or the bushings in the blender, or you can change the entire blade assembly as well.
You don’t have to worry because you can get the blade assembly at such a low price. This happens when you try to blend some unusual amount of ice in the blender.
The blade gets dull and cannot combine hard material like ice and can cause stress on the Motor, due to which the Motor can burn and causes a replacement in it.
4. Ninja Cup Smells Bad
Why a ninja blender does smell bad? that is just because when blending some vegetables and fruit, they leave their substance in gasket and blades,
and that sticks up there, leaving a terrible smell from the blender’s cup. But you can rid of this messy smell with the help of hot water take 1 or 2 cups of hot water and clean it with dish soap, and you will get rid of it.
Some of The Significant Parts of The Blender
- Blades
- O ring gasket
- Motor
- Motor brushes
- Coupler
1: Blades
Blades are the main obstacle in working the blender. The extractor blade helps to blend any food, vegetables, and mixture. The edges come in several shapes and sizes, and they work in the spinning position, which mixing the food in liquid or a mixture form depends on what you blend.
The blades consist of bearings and sealing plates, which make a blade assembly altogether. Now the point is that when the edges get dull and less sharp, it increases the Motor’s pressure, due to which the Motor gets hot and burns and resulting in the burning smell.
You can fix it with the help of a screwdriver and uncase the blade assembly and make sure you unplug the blender; otherwise, you know what happens. Just kidding, be careful before doing anything with blades because they have sharp edges.
Caution: Make sure you unplug the blender before changing the blade assembly.
2: O Ring gasket
O ring gasket is O shaped rubber seal which packs the extractor blades and blade assembly to work correctly, and it’s the only seal that stops the liquid from going towards the Motor and its internal parts. But something this seal, tears,
crack or worn out and then what happens is liquid can easily pass through the seal and can burn the Motor which can cause the replacement in the parts you have to troubleshoot to make sure just the gasket is damaged, or there are other issues as well.
If the gasket needs a replacement, you don’t have to worry because you can get these O-ring gaskets from any hardware shop and get the new one by giving the old one to them. These gaskets come in several sizes.
3: Motor
The Motor is the active or functional part of the blender. In other words, it’s the soul of the blender. Without it can’t function.
However, the blade spins with Motor’s help, and through it, the edges can blend the ingredients for the food you want to cook.
Whenever there is a problem or any issue in any part of the blender, the pressure is applied to the Motor, and it requires a lot of energy to work, which stresses up and decreases the Motor’s performance.
Its brushes maintain the Motor to work correctly, but it has no more excess energy due to the Motor’s pressure. It warms up and mostly burns up. The Motor leaves a burning smell and smoke out of your blender.
The most common reason for a motor’s failure is the worn-out of motor brushes, these brushes in the motor transfer electricity to the motor’s armature. Now, if this happens, you can replace the Motor at your home.
Caution: You should make sure the blender is unplugged before uncasing it.
4: Motor Brushes
The motor brushes are located inside the Motor, which is used to transfer electricity. These carbon brushes are made up of low friction conductive carbonic materials such as copper, graphite, silver, and carbon properties.
Due to the overuse of blenders, you would have worn out brushes over time. The bushes turn into an arc shape, resulting in a burning smell and some smoke as well. These are called carbon brushes.
These are located inside the Motor, and it is used to transfer electricity to the armature inside the electric Motor.
If the brushes are worn out and leaving a burning smell, so there is a need for replacement in brushes, well you don’t have to worry because these brushes can be replaced you don’t need to change the whole motor first you can make by removing Motor from the base of the blender to make sure the brushes need a replacement or the motor whole needs to be replaced.
5: Coupler
Finally, couplers are specially designed when the blades overload and that coupler fails and stops working.
Now a day’s coupler is made up of plastic. When the blades of a blender get overload, that causes failure, and due to it, the coupler fails.
It increases enough heat to melt to coupler off and leaves a burning smell like burning rubber. If that happens, you can check by uncasing the blade’s assembly and the gasket to make sure it is melted.
You can now take that out, replace it, and quickly get the new one from any hardware shop. And you can get these at such a low price if the coupler’s condition is not replaceable you can get them at a low cost as I told you before.
Our best experience with Ninja Professional BN801 blender Kitchen system with IQ, we are using this blender for last one year this is superpower Ninja blender it has full 5-star rating we recommend this version of Ninja blender for you.
Click on Image and Check The Latest Price of Ninja Blender on Amazon
Ninja Blender Smell Like Burning: Final Summary
The point is it we human-invented these entire electrical machines, and we can repair them as well. Still, we invest our money in these electrical machines to make our lifestyle comfortable and relaxed.
But we should keep in mind that we pay a lot of money on these machines and use them appropriately or adequately.
We all know that it’s not easy to make money, and it does not even grow on trees. The thing is that we should use these electrical appliances in a way so that they can work for many years without any issue.
As I said appropriately, you should use it for limited don’t overuse it and try to blend less food and ice if the vast amount you can integrate it for two to three times,
which decreases Motor’s chances to warm and prevent from replacement. The more carefully you used them, the fewer options of replacement in its parts. Also are recommendations to you Best blender for celery juice
If you feel more confident, please share this text with your friends on social media to help them out.
Ninja blender smell like burning (FAQs)
How do you fix a ninja blender electric motor that smells like burning?
You can fix the electric Motor, uncase the blender base and look out in the wire through a multispeed switch to the Motor.
Before doing that, disconnect the overall wire and take a continuity tester to check if there’s a fuse or not. If you can see the circuit is unpacked or open, it shows the fuse is blown.
Now you can change where the fault seems to be with one of identical rating.
How does my ninja blender smell like burning?
The reason why your blender smells like burning is just that whenever there is an issue in any part of the blender, and it does not work correctly,
then it increases the pressure on the Motor and decreases its performance, due to which the Motor warms and burns out leaving the burning smell out of the blender. Sometimes it may be due to overuse. It warms and leaves a burning.
You can unplug the blender and leave it for 25 minutes, and it will be back at its average temperature.
Why does my ninja smell?
It may be due to the liquid or the food that you blend some of its substances stuck in the gasket and blades due to which it smells nasty you can clean the jug,
blades, gasket with the help of hot water and then wash it dish shop and make sure one thing that before doing anything is that smell a burning smell or a nasty disgusting smell because if it’s a burning smell, you should check the interior part first is everything good or not.
Why Nutribullet blenders smell like burning?
If there is a smell coming from your blender or leaving a burning smell from its Motor, it is not a good sign.
It is due to blending a considerable amount of ice or other hard material, which decreases a blender’s performance and applies pressure on the Motor. It sometimes results in the replacement of a motor.
Still, it cannot be the only reason for this smell. It might be due to melting or the worn-out gasket. Hence,
the best way is to uncase the blender with the help of a screwdriver and check the internal part where the issue is and proceed for troubleshooting process then manipulate it you can do it at your home without and any difficulty and worries.
Thank you for visiting!
Author Bio
 | Olivia Olsen is a food, beverage kitchen blender expert/professional writer with a degree in culinary arts, as professional chef. Olivia & his team are a smoothie enthusiast and overall fitness fanatic. We love sharing our passion for juicing with others, we have massive experience in kitchen stuff different brands blenders, to test and review products like kitchen blenders, juicers, and more. |
